The BVP pump drive is very robust and designed for continuous operation. It can be combined with a wide selection of pump-heads. It is equipped with a 3 digit potentiometer speed selector and an analog interface.
Full Description
The BVP pump drive is very robust and designed for continuous operation. It can be combined with a wide selection of pump-heads. It is equipped with a 3-digit potentiometer speed selector and an analog interface.
Smooth operation at a low noise level
Double overload protection
Robust drive for long-term operations
Energy saving due to low power consumption
Small footprint, 2 drives are stackable
Various interchangeable pump-heads
3 digit potentiometer speed selector, adjustable in 0.1%-steps, 1 to 99%
MAX-Switch (e.g. for priming of the tubing system)
Switchable flow direction for clockwise and counter-clockwise operation
Suitable Pump for SCP Controller, Part of the Universal Servo Control Perfusion System
Specifications
Specifications
73-3027
73-3028
Analog Interface
Speed control 0-5 V or 0-10 V respectively 0-20 mA or 4-20 mA
Speed control 0-5 V or 0-10 V respectively 0-20 mA or 4-20 mA
Back Pressure, Max
1.5 bar (22 PSI)
1.5 bar (22 PSI)
Dimensions (H x W x D) English
9.8 x 6.1 x 8.7 in
9.8 x 6.1 x 8.7 in
Dimensions (H x W x D) Metric
260 x 155 x 220 mm
260 x 155 x 220 mm
Display Input (TTL Level)
Flow direction, start/stop
Flow direction, start/stop
Electro Magnetic Immunity
EN 50082-1
EN 50082-1
Electro Magnetic Radiation
EN 55022 Class B
EN 55022 Class B
Mains Connection
115 VAC, 60 Hz or 230 VAC, 50 Hz
115 VAC, 60 Hz or 230 VAC, 50 Hz
Operating Conditions
0? to 40?C (normal environmental conditions)
0? to 40?C (normal environmental conditions)
Power Consumption
100 W maximum
100 W maximum
Protection Rating
IP 30
IP 30
Series
BVP Pump Drive only, pump head must be purchased separately
BVP Pump Drive only, pump head must be purchased separately
